The Generator-Line Enclosure Exhaust System provides a shroud made of poly-carbonate in black with a temperature tolerance of 250 F. The shroud captures both cooling and exhaust air emissions for the EU2000i & 3000is and cooling air exhaust emission on the EU6500is/EU7000is. Simply attach the shroud with provided self-tapping screws to the black plastic sound cover of the generator. The holes are pre-drilled in the shroud to be used as a template. The collar comes riveted to the shroud, then attach the flexible, expandable aluminum tube to the collar with the worm drive clamp.
2GDV Combination Combustion Package EUX70GP and 1GDV. The 2GDV features two kits, providing the exhaust attachment to the Honda EU6500is/EU7000is and a wall outlet attachment also with a “U” clamp and high temp weather proof gaskets.
$185.00
2GDV Combination Combustion Package EUX70GP and 1GDV. The 2GDV features two kits, providing the exhaust attachment to the Honda EU6500is/EU7000is and a wall outlet attachment also with a “U” clamp and high temp weather proof gaskets.
$185.00
4GDV 4″ Wall vent for EUX2. Includes stainless worm clamp and pre-crimped.
$48.00
5GDV 5″ Wall vent. For EUX3, EUX70. Includes stainless worm clamp and pre-crimped
$48.00
EUX70GP For the EU6500IS/EU65IS and EU7000is/EU70is
Exhaust Only. Includes Custom Exhaust Adapter of Durable 14 Gauge Steel, High Temp Grafoil Gaskets, Exhaust Clamp, 33 Inch Flex Exhaust Pipe, Hex Screws and Wrench, and Install Instructions.
$89.00
EUX70SD Cooling Air Emission components. The EUX70SD is for emitting only the heated cooling air on the EU6500is and the EU7000is Honda generators.
$180.00
Parallel generators extended run fuel line assembly – Fuel line assembly with alloy fuel caps, 3 ft of fuel line & fuel valve. Attaches to your own provided marine tank with 1/4 inch thread. For use with paralleling EU1000i and EU2000i Honda generators.
$110.00
Extended Run Fuel Line Only – Fuel line assembly that can be used with marine tank with standard 1/4 inch NPT thread. Fuel line is 3 ft. clear polyurethane 1/4 inch I.D., 1/4 inch nylon fittings, alloy replacement fuel cap.
$59.00
Exposed view of generator “enclosure” for depiction only in utilization of directional cooling air flow and exhaust. Use heat resistant material for the construction of your enclosure. An air intake vent must be provided most preferably on the control panel side of the generator.
The EU2000i, EU2200i and EU3000is use 4 and 5 inch flexible, aluminum tubes respectively. Because the aluminum tube carries hot exhaust gas as well as emitted, heated cooling air, it can get hot and must be mounted to material that can withstand high temperature. The separate exhaust pipe on the EU6500is and EU7000is must also be routed along material that can withstand high heat to prevent damage or even fire.
The cooling air intake for the EU series generators is at the control panel side and emits with exhaust at the opposite side around the muffler (EU2 & 3) and separate upper rear vent on the EU6500is/EU7000is.